1967 Ford Mustang Fastback Restomod

VIN: 7T02C121563

Check out this absolutely stunning 1967 Ford Mustang Fastback Restomod! This Mustang has undergone a complete Nut and Bolt, Rotisserie Build with a very high attention to detail that's seen throughout! The glossy Silver Paint finish, Painted Black Racing Stripes, beautiful Black Interior, 17'' Aluminum Wheels, Side-Exit Exhaust, Shelby Styling, Fog Lights, Hood Pins, along with Polished Components all around are sure to turn heads wherever you go! Under the hood sits a Ford 460ci Stroker V8 Crate Engine with Electronic Fuel Injection! Power is sent to the rear tires through a Tremec TKO600 5-Speed Manual Transmission and a Ford 9'' Rear End with 3.73 Gears and Limited Slip! This '67 is a joy to drive and you can cruise around town with ease thanks to the equipped Power Rack and Pinion Steering and Wilwood Disc Brakes with 4-Piston Calipers and Drilled and Slotted Rotors on all four corners!

The interior of this '67 Mustang is gorgeous and it's in terrific condition! Take a look inside to see this Ford sporting Front Bucket Seating with Lap Harnesses, Rear Bench Seating with Lap Belts and Flip-Down Capability, Black Vinyl Upholstery throughout, Black Carpeting, Polished Tilt Steering Column, Wood and Polished Aluminum 3-Point Steering Wheel, Brushed Aluminum Interior Trim, beautiful Dashboard with AutoMeter Phantom Gauges, Aftermarket Audio System with Remote Control, Hurst Floor Shifter, Floor Mats, Fire Extinguisher, along with ample room in the Carpeted Trunk for all of your cruising essentials! The underside of this Mustang looks absolutely amazing like the rest of the vehicle! You'll want to place a set of mirrors underneath this '67 at your local car show to display the nice condition of the Red Oxide Floors, Bracing, Rocker Panels, New Fuel Tank, Fuel and Brake Lines, Wilwood Disc Brakes, Rear End, Driveshaft, Tremec Transmission, Engine Oil Pan, Power Rack and Pinion Steering Components, Custom Independent Front Suspension with Tubular Control Arms and Adjustable Coilovers, 4-Link Rear Suspension with Tubular Arms and Adjustable Coilovers, Front And Rear Sway Bars, Ceramic Coated Headers, along with the Dual Exhaust System that's fitted with Polished Stainless Steel MagaFlow Mufflers!

This 1967 Ford Mustang Fastback Restomod is truly a stunning example of brawn and beauty! Various Component Manuals are are also traveling along with this Ford as well! Any collector or enthusiast would love to own this Mustang and it won't last long. Call us today before it's gone!

Call us today and let VMS park your dream in your driveway! 248-974-9513

Go to www.vanguardmotorsales.com to see over 100 HD photos and our in-depth video for this 1967 Ford Mustang Fastback Restomod and over 200 other classics!

Mechanics:

Ford 460ci V8 Crate Engine

Engine # 6010 - BOSS351 9.5

- Ford Racing Tag:

• Date: 08/21/2013

• Serial #: S00667926

• Part #: M – 6007 - Z460FFT

• 460 Boss Block

- 10:1 Compression Ratio

- Scat Forged Crank and Rods (H Beam Rods, 6.125 Length)

- Mahle Forged Full Floating Pistons

- Hydraulic Roller Camshaft

• .594/618 Lift

• 242°/248° Duration @ .050

- Aftermarket Sheet Metal, Tig Welded T - Pan

- MSD Distributor

- Ignition Being Triggered by Crank Trigger

- MSD 6A Ignition Box

- MSD Blaster 2 Coil

- Edelbrock Super Victor Intake

- Aluminum Aftermarket Serpentine Belt System.

- Aluminum Becool Radiator to Which Is Affixed Twin Spal Fans Being Controlled by A Spal Fan Controller.

Aluminum Ford Racing Z Cylinder Heads

- Part #: M – 6049 - Z304DA

- ARP Head Bolts

- Ford Full Roller Aluminum (1.65 Ratio)

- Electric Fuel Pump Mounted at Rear of Car on Passenger Side

- Full Fuel System Plumbed With A/N Lines and Fittings

- Magna Fuel Filters Throughout

- Wilson Manifolds Throttle Body

- Edelbrock EFI Fuel Rails

-30 lb/hr Injectors

- Holley CPU

Tremec TKO600 5-Speed Manual Transmission

Transmission #C - 2605865

- Tag: TR3550 - 11 LD14 TCET5008 AF 0026

- .64 Overdrive Gear

- 2.87 First Gear Ratio

- 2013 Year

- Assembly Date: 7/24/13

- Explosion Resistant SFI Approved Bellhousing

- Aftermarket Hydraulic Clutch Conversion, All Being Fed by Braided Stainless Lines And What Looks To Be A Wilwood Master Cyl.

- Mcload clutch

Front Suspension - Independent

Rear Suspension - 4-Link

- Front Suspension Has Been Converted to Accept Fully Adjustable Coil Overs

It Currently Has "Varishock" Adjustable Coil Overs

- Both Upper and Lower Front Control Arm Have Been Changed Over to Modernized Hiem Joint Tubular Retrofitted Stuff

- Rear Suspension Has Been Converted To 4-Link

- Rear Suspension Arms Are Tubular (Uppers Being Adjustable) Mace By "Total Control Products"

- Rear Suspension Has Had an Aftermarket Rear Sway Bar Added

- Rear Suspension Has the Same Varishock Fully Adjustable Aluminum Body Coil Overs as Well

Ford 9” Rear End

- Gear Ratio: 3.73

- Custom Made Steel Driveshaft

- Limited Slip Differential

- Nodular Iron Case

- Casting Date: 9L6

Front Wheels - 17”

Rear Wheels - 17”

Front Tires - 235/45ZR17

Rear Tires - 255/40ZR17

Front Brakes - Disc

Rear Brakes - Disc

- All 4 Corners Are Outfitted with Wilwood 4 Piston Calipers

Power Steering

- Total Control Rack and Pinion

Side Exit Exhaust

- Car is Equipped with Full Length, Jet Coated Headers.

- MagnaFlow Mufflers

Body:

- Paint is Gorgeous

- Body Lines are Straight

- Driving Lights looks Great

- Custom Grille

- Custom Lights

- Bumpers in Good Condition

- Doors and Trunk Operate Smoothly

- Shelby Style Fuel Fill

Interior:

- Wood Steering Wheel

- Race Car Seat Belts

- Caret is Clean

- Fold Down Back Seat

- Headliner in Good Condition

- Upholstery is Incredible

Underneath:

- Gas Tank is New

- Primer looks Great

- Frame is Solid

- Nose looks Good

- Rockers are Solid

Don't miss out! Call Tom 7 days a week! 248-974-9513

tom@vanguardmotorsales.com